您要查找的是不是：
- Its finite element model is established. 构造了其有限元模型。
- Comprehensive function of varying contact length backup roll(VCR)is analyzed by using the finite element model for elastic deformation of rolls. 利用建立的有限元辊系弹性变形模型,分析了变接触支持辊(VCR)的综合性能。
- A static finite element model of an air spring was given. 摘要文中建立了空气弹簧的静态有限元模型。
- The finite element model of opening gap tantalum thin-walled tube is setup. 为了控制钽薄壁管焊接成形的质量,进行钽薄壁管开口间隙场计算模型的研究。
- This method is not only suitable to the arachnids, but also has certain model function to other arthropod genome DNA extraction. 盐析法不仅适用蜘蛛类，对其他节肢动物基因组DNA提取也有一定的借鉴作用。
- A model was developed to analyze the inter-filament mechanical function,and the creep of the cross section PTT and PET filaments was expatiated by four element models. 对长丝之间的力学作用进行了模型建立和分析,利用四元件模型对十字形PTT和PET长丝的蠕变行为分别进行力学阐述,得出了长丝的力学参数:弹性模量、黏滞系数。
- Abstract: Geophysical model function（GMF） is the basis of scatterometer wind field retrieval and the prerequisite to effective running of the retrieval algorithm. 文章摘要: 地球物理模型函数（GMF）是散射计风场反演的基础及算法有效运行的前提条件。
- After AZ’s retreat from the spotlights there is no longer a beacon of light and Oranje is definitely no candidate to take up the role model function anytime soon. AZ出局，那么荷兰足球在欧洲最后的一根蜡烛也将被掐灭，荷兰足球将在本赛季的欧洲联赛销声匿迹。
- The students accept esthetics theory to strengthen the university student political ideas education to accept the effect to have the model function in the western countries. 摘要西方接受美学理论对加强大学生思想政治教育接受效果具有借鉴作用。
- A tapered beam element model is used to simulate the behaviour of a masonry arch bridge with loading. 采用梯形梁单元分析砖石拱桥在载荷作用下的行为。
- Primary study on the construction of the finite element model of tooth and post-core. 牙齿与桩核三维有限元建模的初步探讨。
- Study Design. In vivo study of a computed tomography (CT)-based nonlinear finite element model (FEM). 研究设计：基于CT的非线性有限元模型(FEM)的体内研究。
- The principles to construct finite element model for modal analysis of the cylinder block have been obtained. 通过研究，得出了建立内燃机机体的有限元模型的一些原则。
- This paper deals with the finite element model of DWX hydraulic prop in aid of Pro/MECHANICA. 本文用Pro/MECHANICA有限元分析软件,建立了柱塞悬浮式液压支柱的有限元模型。
- One is taper section 3D beam element model, the other is 3D compounding model with solid element and shell element. 结果表明，在均布荷载与集中荷载作用下箱梁的剪力滞效应明显不同，对于地震时程反应分析而言，采用变截面三维梁单元模型计算效率较高。
- In the rheological method,relative differential MWD of cellulose is determined by dynamic data according to Tuminello diluted assumption theory,and PDI value of cellulose is calculated through Wesslan function which is a model function of MWD. 流变法中;根据Tuminello的“稀释假定”理论;利用动态流变G′和G″的主曲线;计算出纤维素的相对微分相对分子质量分布; 应用Wesslan函数适应法(相对分子质量分布的模型函数)计算出相对分子质量分布的多分散指数(PDI).
- The finite element model of a small punch test specimen of 1Cr0.5Mo steel is established. 基于小冲孔蠕变试验 ;建立 1Cr0 .;5Mo耐热钢小冲孔蠕变试样的有限元模型。
- According to that method, the stability of high slope of the hydroelectric power station in reservoir area is analyzed, the engineering practices prove that the model function set up is effective. 根据这一思路，我们分析了某水电站库区高边坡复杂块体稳定性，工程实践证明，所建模型实用性较强。
- The finite element models simulating normal, pre- and post-PFO were created. 再者，可产生模拟正常、病患的股骨近端截骨术术前及术后情形的有限元素模型。
- The hope works the analysis concrete procedure through this article to HRG Corporation and the experience introduction, carries on the work to other companies to analyze certain model function. 希望通过本文对HRG公司工作分析的具体做法和经验的介绍，对其他公司进行工作分析起到一定的借鉴作用。
