您要查找的是不是：
- Signaling Link Code = the member number within a link set. Signaling Link Code = 链路群内的成员号。
- The alternate link set must not be equal to the preferred link set. 交替链路群的值一定不能与首选链路群相等。
- A combined link set provides alternate paths between two SS7 nodes. 合并的链路群提供两 SS7 节点之间的交替路径。
- This value must be different from the other two link set values. 该值必须和其他两个链路群的值不同。
- Signaling Link Code--he member number within a link set. Signaling Link Code -- 链路群内的成员号。
- Link Set = the link set to which this specific link belongs. Link Set = 该特定链路属于的那个链路群。
- A link set may consist of up to 16 links. 一个链路群可能由 16 条链路组成。
- Preferred Link Set-the preferred link set is specified in this field. Preferred Link Set -- 在该字段指定首选的链路群。
- All 16 links can be assigned the same link set number. 全部16 条链路会分配到同一个链路群号码。
- Link Set--this is a number identifying the link set to which this particular link belongs. Link Set -- 这是识别该特定链路所属链路群的一个号码。
- For non-STP applications (such as the 5ESS DCS) that do not have a combined link set,this field must be set to 0. 对于没有组合链路群的 STP 应用程序(比如 5ESS DCS)，必须将这个字段设置为 0。
- This value must be unique within a link set and must agree with information in the far end STP or 5ESS DCS. 在链路群中，该值必须是唯一的，而且必须与远端 STP 或 5ESS DCS 上的信息一致。
- Link Set-this is a number identifying the link set to which this particular link belongs. Link Set -- 这是识别该特定链路所属链路群的一个号码。
- Alternate Link Set-the alternate link set to be used in routing flag (DLS_RTG) case. Alternate Link Set -- 交替链路群设置为用于路由标志为 (DLS_RTG) 的情况下。
- For non-STP applications (such as the 5ESS DCS) that do not have a combined link set, this field must be set to 0. 对于没有组合链路群的 STP 应用程序（比如 5ESS dcs），必须将这个字段设置为 0。
- Alternate Link Set 裈he alternate link set to be used in routing flag (DLS_RTG) case. 交替链路群设置为用于路由标志为(DLS_RTG)的情况下。
- When a process terminates it sends an exit signal, either normal or non-normal, to the processes in its link set. 当一个进程终止的时候，它发出一个退出信号（不论是否正常退出）到和它链接在一起的所有进程。
- For all other clusters,the link set value should be the link set value that is entered on all instances of the s7ln or is7ln form. 对于所有的其他链路群值应该是在所有 s7ln 或 is7ln 表中所有实例中输入的链路群值。
- Non-STP applications,including the 5ESS DCS,must not have a combined link set,and this field must be set to 0 in those cases. 对于非 STP 应用程序，包括 5ESS DCS，一定不能有组合链路值，且在那种情况下，该字段必须设置为
- It is now our aim to set up a factory. 我们现在的目的是创办一座工厂。
