您要查找的是不是：
- Body construction fused epoxy coated cast iron 阀体采用熔融环氧树脂涂敷铸铁结构
- It's a three components improved epoxy coating. 为三组份改性环氧涂料。
- It's a two components improved epoxy coating. 为双组份改性环氧涂料。
- It's a two-component epoxy coating. 为双组份环氧涂料。
- It's a two-component amine adduct cured epoxy coating with special conducting electrostatic materials. 是一种由特种导静电材料组成的双组份胺加成固化的环氧涂料。
- Other project: Repair & maintenance, ductwork of water & power, epoxy coating ground, loading & unloading, emergency labor service etc. 零星工程：维修、保养、水强弱电、环氧地平、起重搬运、劳务应急输出等。
- For the coating performance in the underground water, the rust inhibitor primer is superior to the epoxy coating. 以涂装对铅管在地下水中的保护性而言，抑锈底漆涂装优于环氧树脂涂装系统。
- Corrosion resistant cylinder construction includes epoxy coating on the head, cap and gland, all of which are cast iron. 耐腐蚀的缸体结构包括在顶部、盖和密封装置上增加环氧涂层，并且全为铸铁材质。
- Epoxy Coating and Lining: Epoxy resin is applied after the internal surface treatment is completed in accordance with SA2 1/2 requirement is completed. 环氧涂层与衬里： 内表面按SA2 1/2规定处理完后涂环氧树脂。该工序遵守卫生条例及AWWA C-210标准。**我们还使用煤焦油搪瓷涂层、煤焦油环氧涂层。
- The composition of flake zinc powder based of heavy duty anticorrosive epoxy coating was described, and function of each composition was introduced. 讨论了鳞片状锌基环氧富锌涂料的组成，各组分的作用以及涂料的配方设计。
- Carbon channel is usually finished with electro-galvanization. Hot dipped galvanzined finish or epoxy coating or nigrescence is also available on special order. 碳钢型钢的表面处理普通为电镀,如需热浸镀锌、喷塑、发黑等要在订货时说明。
- At last the merit and index of anticorrosive epoxy coatings were discussed. 介绍了锌基环氧富锌涂料的主要优点、使用范围并对其指标进行测定。
- The formation of anticorrosive epoxy coatings was described as well. 分析了鳞片状锌粉的特点并对其主要性能指标进行测定。
- The resistance to corrosion of an epoxy coating containing the pigment of zinc chrome yellow was studied using electrochemical impedance spectroscopy (EIS). 利用电化学阻抗谱(EIS)技术研究了含有锌铬黄防锈颜料的环氧酯漆涂层的耐蚀性能。
- Carbon channel is usually finished with electro-galvanization.hot dipped galvanzined finish or epoxy coating or nigrescence is also available on special order. 碳钢型钢的表面处理普通为电镀，如需热浸镀锌、喷塑、发黑等要在订货时说明。
- By formation of epoxy coating on n-dodecanethiol self-assembled monolayer on copper substrate, self-assembled monolayer was introduced between epoxy coating and copper electrode. 通过在正十二硫醇自组装单层膜表面制备环氧树脂涂层的方法,在涂层/铜基体界面引入自组装界面层。
- As a professional manufacturer, Guang Ying Metal Products Manufactory produces pet cages by ironware with epoxy coating, e-coating, chrome coating, zinc coating from 1992. 作为一家专业生产厂家, 广盈金属制品厂(中盈宠物用品厂)从1992年就开始从事宠物笼的生产。
- The investigation of corrosion resistance of epoxy coating containing pigment of zinc chrome yellow was made using electrochemical impedance spectroscopy(EIS) measurement. 利用电化学阻抗(EIS)技术研究了含有锌铬黄防锈颜料的环氧树脂涂层的耐蚀性能。
- A kind of aliphatic diamine adducts,possessint of unigue properties.Less poisonoussness and odor,used for the curing agent of epoxy coating is introduced. 介绍了一类性能独特的脂肪族和脂环族二胺加成物环氧固化剂，其毒性低、气味小。
- Lead will fuse at quite a low temperature. 铅会在相当低的温度下熔化。
