您要查找的是不是：
- Turn off supply pressure and observe float drop to open air inlet. 关闭供应压力,观察浮子下降,因此开启空气进口。
- RAM AIR INLET MECHANICAL LINKAGE. 冲压空气进口机械连杆机构。
- Does your machine have pressure air? 你的机器能否提供压缩空气?
- Slowly open vent needle valve just as air inlet opens. Record differential pressure. 当空气进口开启时,慢慢开启排气针形阀。记录压差。
- Slowly open needle valve "C" bypass (yellow) just as air inlet opens. Record differential pressure. 正当空气进口打开时，慢慢开启针形阀“C”旁路（黄）。记录压差。
- Remove the air inlet hose from the throttle body and air cleaner. 从节流阀体和空气滤清器上拆下气流入口软管。
- It was the idea of supporting a craft on a pad, or cushion, of low- pressure air, ringed with a curtain of higher pressure air. 这顶计划是将船支承在低压空气垫或低压空气软垫上，低压空气周围围着较高气压空气幔。
- Check found birdstrike on radome and R engine air inlet. 雷达罩和右发进气道口有鸟击痕迹。
- Air inlet throttle valve with pneumatic actuator and positioner. 空气进气节流调节阀：带有气动定位和执行机构。
- Requirement: Air inlet must start to open when supply pressure is 1.0 PSI or above. Air inlet must be fully open when supply pressure is atmospheric. 要求：当供应压力达到或超过1.;0PSI时，空气进口必须开始打开。当供应压力达到大气压力时，空气进口必须完全打开。
- Connect the air inlet hose to the throttle body and the air cleaner. 将空气入口软管接至节流阀体和空气滤清器。
- Using negative pressure air pipe to ventilate for the being constructed tunnel. 使用负压风管对在建隧道进行通风换气。
- Ringing pressurized air into the system. 将加压气体引至系统。
- One pressurization air supply inlet is placed in stair well every two floor.Each floor has one joint-used atria. 楼梯间每二层布置一个加压送风口，合用前室每层设一个加压送风口。
- High pressure air is brought through the strut and simulates the engine air flow. 高压空气通过支板引入并模拟了发动机的气流。
- Separation of the water supply from the air inlet is accomplished by means of a diaphragm seal. 供水与空气的隔离是通过采用隔膜密封的方法实现的。
- High pressure air for homogenizing is supplied by Roots blower under homogenizing silo. 均化所用高压空气由库底罗茨风机提供。
- Next, let's make the simple panel under the air inlet that we can find on the side. 接下来，让我们作一个简单小组根据空气进说，我们能够找到对的一面。
- In an air jet loom, high pressure air carries the filling yarn through the shed. 在喷气织机上,高压气流携带纬纱穿过梭口。
- Separation of the water supply from the air inlet is accomplished by means of a diaphragm seal . 水供应与空气进口的分离通过隔膜密封的方法实现。
