您要查找的是不是:
- Repeat the first three steps above for initializing the master node. 重复前面初始化主节点的前三个步骤。
- The master node assembles the results, further distributes work, and so on. 主节点收集结果,并继续分发任务,依此类推。
- In a typical setup, the master node is where the applications are initiated. 在典型的设置中,应用程序在主节点上开始运行。
- ERROR: MASTER NODE 26 INSTANCE FIRSTONE IS NOT ON THE AXIS OF SYMMETRY. 可是我的26节点明明就在对称轴上啊!
- The master node divides the work between several slave nodes. 主节点负责将任务划分到多个从节点上。
- There is a slight chance that each node will need to be rebooted while working on a job submitted by the master node. 各个节点在执行主节点所提交的作业时,需要重新引导的机率较小。
- This application shows the processes that have been migrated from the master node to the drone. 这个应用程序显示已经从主节点迁移到从属节点的进程。
- Verify that port 691 is not restricted by a firewall by initiating a telnet session to port 691 of the affected servers and the master node. 通过启动与受影响的服务器和主节点的691端口的telnet会话,确认691端口未被防火墙禁用。
- The first server that is installed into the routing group is automatically designated as the master node or routing group master. 路由组中安装的第一台服务器自动被指定为主节点或路由组主服务器。
- The experimental system on 380V electrical power is set up through designing.The data is sampled in two different loads.At the same time RTU node control the switch opening and cutting. 经过设计,建立了一个实验系统在380V电网上进行了实验,测出了两种不同负载下的数值,并由RTU实现对一些开关的分、合闸控制。
- In Exchange 2003, if msExchRoutingMasterDN points to a deleted object, the master node relinquishes its role as master and initiates a shutdown of the master role. 在Exchange 2003中,如果msExchRoutingMasterDN指向已删除的对象,则主节点会放弃其主服务器的角色,并关闭主服务器角色。
- In order to cornect between CAN bus and LIN bus, I designed the CAN/LIN data exchange gateway based on PIC18F248.That is the CAN node, as well as is the LIN master node. 为了使CAN网络和LIN网络能够互连互通,设计了基于PIC18F248的CAN/LIN数据交换网关。
- To do this, they use the ncacn_ip_tcp value in the network address attribute of the Exchange server to generate the SPN for the master node by calling DsClientMakeSpnForTargetServer. 为此,它们使用Exchange服务器的网络地址属性中的ncacn_ip_tcp值并通过调用DsClientMakeSpnForTargetServer来为主节点生成SPN。
- In terms of the terminal node controller to connect the transmitter-receiver and computer that has RS-232,this paper explains the method of packet radio communication. 结合终端结点控制器、收发设备和具有标准RS-232接口的计算机连接方案,说明了实现无线分组通信的方法。
- In the TT-FPS scheduler, firstly, the master node should send synchronization message, which also introduces time-triggered mode, to set up the uniform clock benchmark in the system. TT-FPS调度器中主节点首先通过时间触发的方式发送同步消息,建立整个系统的统一时间基准,在接收到同步消息后,主/从节点各自均以事件触发的方式控制待传输消息发送任务的执行。
- The basic idea is to temporarily convert the nodes into a Linux system and from there they join the master node as member of a cluster. 其基本思想是将节点临时转换为Linux系统,然后作为集群的成员连接到主节点。
- In the mode of master-slave, the PC with CAN adapter performs as the master node and the other five Field controllers perform as the slave nodes. 在主从方式下,带有CAN适配卡的PC机为主节点,其余5个现场控制器为从节点。
- The paper shows the design and implementation of the software and hardware of the network node controller in a new Packet Radio Network. The controller serves as the Network Sublayer and Data Link Layer device of the Packet Radio Network. 本文介绍了正在研制中的新型分组无线网节点控制器的软硬件设计与实现,该节点控制器用于完成分组无线网网络子层和数据链路层的功能。
- As S7-300/400 series PLC(Programmable Logic Controller) is node controller based on field bus net,it is difficult to develop the communication software on Lab Windows/CVI platform for its privacy of communication protocol. 西门子S7-300/400系列可编程逻辑控制器(PLC)是基于现场总线网络的节点控制器,其通信协议不开放增加了在Lab Windows/CVI等平台上开发通信驱动软件的难度。
- The cruel master beat his slaves with a whip. 残酷的主人鞭打他的奴隶。