您要查找的是不是：
- The local DLCI must be statically mapped to the network layer address of the remote router when the remote router does not support Inverse ARP. 本地端的DLCI必须静态应对到远端路由器的网路层位址当远端路由器没有支援反转位址解析协定。
- The encapsulation frame-relay command is assigned to the physical interface. All other configuration items, such as the network layer address and DLCIs, are assigned to the subinterface. 概括的讯框中继指令被指定到实体介面.;其他的设定都被分配到子介面;像是网路层位址和资料链结连接识别码。
- command is assigned to the physical interface. All other configuration items, such as the network layer address and DLCIs, are assigned to the subinterface. 概括的讯框中继指令被指定到实体介面.;其他的设定都被分配到子介面;像是网路层位址和资料链结连接识别码。
- Duplicate network layer addresses Because network layer addresses are assigned, 复制网络层地址因为网络层地址分配通过软件不能烧入硬件
- Routers operate at the Network Layer. 路由器运行在网络层。
- List the key internetworking functions of the OSI Network layer. OSI网络层的主要互联网功能列表。
- The network layer assigns the logical address, or IP address, and is then serviced by the data link layer, which assigns the physical address, or MAC address. 网路层指定逻辑位址或称IP位址，随后由资料链结层提供服务，资料链结层指定实体的位址或称MAC位址。
- You can think of this as creating a secure trusted tunnel at the network layer. 您可以将这看作是在网络层创建安全的受信任隧道。
- Unable to inita; ize the network layer! Check your winsock for errors. 不能初始化网络!检查你的网络套接字。
- Stateful inspection is a firewall architecture that works at the network layer. 状态检查是工作于网络层的防火墙体系结构。
- Unable to initialize the network layer! Check your winsock for errors. 无法初始化网络层! 检查winsock是否有错误。
- Ipchains is IP packet filter fire wall on the network layer of Linux. Ipchains软件是Linux平台上网络层的IP包过滤防火墙 .
- It encapsulates the network layer information in a frame (the Layer 2 PDU). 网路层的任务在互连网路间移动资料。
- DV Algorithm C language. The network layer for network distance vector routing. DV算法的C语言实现。用于网络的网络层距离向量选路。
- The network layer has the task of moving the data through the internetwork. 网路层的任务在互连网路间移动资料。
- Address Resolution Protocol (ARP) determines the data link layer address, or MAC address, for known IP addresses. 位址解析协定(ARP)是对己知的IP位址，决定资料链结层位址，或MAC位址。
- The MTP2 layer uses primitives to interact with the network layer above it and the physical layer below it. MTP2 层使用原语与上面的网络层和下面的物理层进行交互。
- The data link layer builds a frame around the network layer data so the necessary checks and controls can be applied. 资料链结层在网路层资料之外建立一个讯框，如此一来必要的检查和控制才能被套用。
- Which two Cisco IOS commands can be used to verify connectivity above the network layer of the OSI model? 题目的准确翻译为：哪两个ios的命令可以验证osi模型的网络层以上各层的连通性。
- MTP Level 3,the network layer,provides message handling and network management functions and procedures. MTP 第 3 级，网络层，提供消息处理和网络管理功能和过程。
