该词条未找到_海词词典

您要查找的是不是：

International Journal of Engineering Fluid Mechanics. 国际工程流体力学杂志。
Look, I were really not a good student of fluid mechanics. 看来我实在不是一个流体力学的好学生。
New collection of exercise problems in engineering fluid mechanics II. 工程流体力学新型习题集2。
Robert L. Mott，2000，“Applied Fluid Mechanics，5th ed”，prentice-Hall，Inc. 流体力学，张世乡，陈维方，龚杰，钟明吉译，全华科技图书股份有限公司，台北.
The model can take fully account of the intrinsic nature of VIV with regard to lock-in regions, added mass and nonlinear fluid damping effects. 该模型能充分体现涡激振动现象中频锁范围、附加质量以及非线性流体阻尼等本质特点，且形式简洁，计算方便。
The modern fluid mechanics and thermodynamics are linked so closely as to be virtually the same subject . 现代流体力学与热力学的联系如此密切，几乎成为一门学科。
Emphasizing the role of exercise and homework in the teaching of fluid mechanics. 在流体力学教学中加强习题课与作业环节的体会。
The function of siphon unit based on fluid mechanics siphon principle is to control turnon and turnoff of pump outflow. 虹吸管出水断流装置是基于流体力学虹吸原理、控制水泵出水通与断的装置。
Garret C J R.Wave forces on a circular dock(Part 1)[J].Journal of Fluid Mechanics,1971,46:129-139. 尤云祥;缪国平;程建生;朱仁传.;两层流体中水波在刚性垂直薄板上的反射与透射[J]
F. P. Bretherton, "The Motion of Long Bubbles in Tubes", J. Fluid Mechanics, 10, 166-188(1961). 张修铭,"转注射出成型过程中气泡成型机制之可视化探讨",国立中央大学机械工程研究所硕士论文(1997
The coupled model smoothly inpaints the target region by using inviscid Helmholtz vorticity equation in fluid mechanics. 耦合模型使用流体力学中无粘度亥姆霍兹涡量方程平滑的修复图像缺失信息区域。
In order to achieve better simulation of dynamic clouds, this paper proposes a way to integrate FBM and Fluid Mechanics based Navier-Stokes Equation. 最后，本文提出了一种将FBM算法和基于流体的方法相结合的方法，通过求解Navier-Stokes方程得到基于物理模型的云的动态效果。
The low temperature gas-liquid separator combines aerodynamics, thermodynamics and fluid mechanics theories to make a compact gas conditioning process. 低温气液分离器是一种结合了气体动力学、热力学和流体力学理论为一体的新型气体干燥处理装置。
J.C.Tannehill, D.A.Anderson, R.H.Pletcher (1997) Computational Fluid Mechanics and Heat Transfer, 2nd ed., Talor &Francis, Philadelphia, PA, Chapter 3. 王耀尘杨天祥陈国声颜嘉良;多区段晶圆背压对于化学机械研磨制程中材料移除率空间均匀度的影响;第十四届全国计算流体力学学术研讨会.
Coekerill.Themodynmics and fluid mechanics of Ranque-Hilsch vortex tube.Masters Dissertation,University of Cambridge,1998. 巫江虹;张祉佑.;涡流管分离模型及实验研究
Anderson, D. A., Tannehill, J. C., Pletcher, R. H., 1997, Computional Fluid Mechanics and Heat Transfer, 2nd ed., Taylor &Francis, London. 王振源及吴志阳;2001;“快速热处理机台即时温度量测系统最佳化设计;”机械关键系统技术研究发展第二期三年计划;中山科学研究院.
Abstract: The strong viscous effect induces the fluid mechanics in micro nozzles sufficiently deviated from those in macroscale. 摘要：在微缩放喷嘴中，强粘性影响导致了流动结构完全偏离了宏观尺度。
The formula for moving mould casting passage assemble gap in the case of no steel leaking has been deduced by the viscosity fluid mechanics method. 本文应用粘性流体力学的方法推导了在钢不钻漏情况下移动式结晶器浇铸通道配合间隙公式。
On the basis of fluid mechanics, a comprehensive model for simulating flow field at nozzle exit is developed by using desecrate vortex method. 根据流体力学原理，用离散涡方法建立了在复平面上模拟喷嘴出口流场的一套完整模型。
According to the fluid mechanics, Euler's method, and the concepts of traffic flow system and control field are proposed. 参照流体力学，提出研究交通流的欧拉方法、交通流系统和控制域的概念。