您要查找的是不是：
- Lpr. Exe Send a print job to a network printer. 重定向打印任务到网络中的打印。
- Print job %1 has been deleted and will not print. 已删除打印作业%251,不会再打印。
- You specified an invalid print job number. 指定的打印作业号码无效。
- Can you send the job specification to me at once? 你能把工程作业的详细说明马上送来吗?
- Unable to start print job due to insufficient memory or invalid printer specification. 由于内存不足或指定的打印机无效,无法启动打印作业。
- Stopped indicates that the printer's print job queue is stopped. “已停止”说明打印机的打印作业队列已停止。
- A PrintSystemJobInfo that represents the print job and its status. 用于表示打印作业及其状态的PrintSystemJobInfo。
- Informs the device driver that a new print job is starting. 通告设备驱动程序开始一项新打印作业。
- This message is from the lp command; it shows the print job id. 该消息来自lp命令;它显示打印作业标识。
- You may not be able to finish the current print job. 可能无法完成当前打印作业。
- Cancels all print jobs on the selected printers. 取消所选打印机上的所有打印作业。
- The target printer is not accepting print jobs. 目的打印机不接受打印任务。
- Gets or sets a value indicating whether the print job should be canceled. 获取或设置一个值,该值指示是否取消打印作业。
- Job Title SDET Lead Job Specification We are looking for a results-oriented candidate that is capable to perform soli...... ... 公司名称：北京软通动力信息技术有限公司工作地点：广东省深圳市发布时间：2009-3-27
- This operation cannot be performed on the print job in its current state. 在打印作业当前状况下,无法执行这项操作。
- Therefore limit the baud rate to 76,800 baud unless required by job specification and observe the following wiring guidelines. 因此限制鲍率为76,800 鲍除非被工作规格需要而且观察下列各项配线指导方针。
- PCONSOLE to check the DMPQUEUE.You should see a new print job in the queue. In case it 本站所提供的摄影照片，插画，设计作品，如需使用，请与原作者联系。
- The job specifications summarized the design criteria. 工作说明书概括总结了设计要求。
- This is the machine you want to work on and send print jobs from. 这是指你在上面工作并希望从这里发送打印作业的计算机。
- Drivers from the abolition of a print job, the supply will be temporarily lights flashing. 从驱动程序取消一个打印作业时，电源指示灯会暂时闪烁。
