您要查找的是不是：
- quasi one dimensional flow 准一维怜
- one dimensional flow 一维流
- Based on one dimension flow theory and Lagrange method, the correlation of speeding rate of particles under gas flow drag with the size of particles and the length of Laval nozzle used for the gas and solid two-phase separation test apparatus was studied. 摘要采用一元流动理论和拉格朗日方法，研究了用于气、固两相分离试验装置的缩放喷管内，被气流拖曳的颗粒加速率与颗粒大小和缩放喷管长度的关系。
- But the FSL is far from one dimensional. 适合17”或以上轮胎安装。
- An one dimensional homogenous adiabatic fixed bed reactor model was adopted to simulate a radial flow reactor for dehydrogenation of ethylbenzene to styrene under vacuum. 采用一维拟均相绝热径向反应器模型模拟乙苯负压脱氢径向反应器。
- To predict cavitation incipience, pressure wave and distribution of one dimensional unsteady flow before piston moving in pipe were calculated by the method of characteristics. 为了预测空化初生，用特征线法计算了减速运动活塞前管内一维非定常流的压力变化及分布，分析了管内压力变化规律及空化初生的条件。
- Quasi One Dimension Modified Computing Method for Multi-Cycle Fuel Management Calculation 多循环燃料管理计算的准一维修正计算方法
- The mechanism analyses are composed of one dimensional steady and unsteady flow theory, Couette turbulent theory and three dimensional unsteady compressible flow"s assumption. 同时引入速度增加倍数和最大升温幅度等无量纲量，完善了相关理论，使研究更为直观便捷。
- The one dimensional simulation revealed the agreement of the method with the free molecular flow, the exact solution of the continuum flow and the precise solution of the Boltzmann equation. 一维模拟显示其与自由分子流，连续介质的准确解和玻尔兹曼精确数值解相符。
- Three dimensional flow of polymer in extrusion dies is studied by Phan Thien and Tanner(PTT) model. 用PTT模型研究了聚合物在挤塑口模中的三维流动,提出一种通用的三维路线示踪方法用于流动分析。
- Length is one dimension, and breadth is another. 长是一种度量, 宽又是另一种度量。
- Parameter has more than one dimension. 参数具有一个以上的维度。
- Arrays can have more than one dimension. 数组可以具有多个维度。
- Realized the two dimensional flow field of steam ejector by the method of CFD numerical simulation,and discussed the maneuvering condition of ejector. 用CFD数值模拟的方法实现了蒸汽喷射器二维流场的分布和变工况特性。
- Discusses arrays that have more than one dimension. 讨论具有多个维度的数组。
- The three dimensional flow of metals during rollinghave been determined using the rigid-plastic finite element method of reducible volume. 本文应用刚塑性有限元法中的体积可压缩法,求解了板带轧制过程中的三维流动问题。
- Length is one dimension, and width is another. 长是一种度量，宽又是一种度量。
- A line has one dimension and a square has two. 线是一度空间，平面是两度空间。
- Having or existing in one dimension only. 单向度的具有或仅存在于一个方向的
- In this paper,a new method of measuring liquid three dimensional flow velocity by rotaining the probe in the plane was submitted basing elaborate analyzing of hot film anemometer. 本文针对热膜流速仪元件的工作原理提出了在平面旋转测量液体三维流速的方法,并测量了大型精馏塔板液相单相三维流场。
