您要查找的是不是：
- Remove the AC servo motor from the bracket. 从支架上取下马达。
- Attach the new AC servo motor to the bracket. 装上新马达到支架。
- Exchange the servo motor 2HP in spiral. 螺旋交流伺服马达2HP。
- Feed use of the AC servo motor torque of the motor. 进给部分电机采用交流伺服电机转矩大。
- Mill spindle is used by either inverter or servo motor. 铣床主轴采用变频马达或伺服主轴。
- Lathe spindle is used by either inverter or servo motor. 车床可采变频主轴或伺服主轴。
- The drive is either a three-phase or a three-phase servo motor. 传动机构可以是三相或三相伺服马达。
- Tighten the N coupling nut on the AC servo motor side temporarily. 临时拧紧马达边的N型连接螺母.
- Slotted on shaft end ,suitable for DC motor and servo motor. 轴头开槽，适用于直流电机，伺服电机。
- Each slide is driven by a separate ballscrew and AC servo motor. 每张幻灯片是由一个单独的滚珠丝杠和交流伺服电机。
- This paper analyzes a semi closed loep servosystem driven by DC servo motor, discusses how the system and it's building model are affected by the rigidity, nonlinear link and milling force of system. 针对直流伺服电机驱动的伺服进给半闭环系统进行了分析。
- The newly developed cutting unit is also driven by an own servo motor. 新研发的切割机也由自带的伺服马达来驱动。
- CNC system imported from Taiwan and servo motor imported fro japa are adopted. 一、采用台湾进口电脑控制系统和日本进口伺服电机。
- Feeding system adopts CNC servo motor, bending angle uses CNC control. 采用数控伺服电机进料系统，数控折弯角度控制系统。
- New “X” servo motor, new spindle bearings, new pinion &gear drive in 2007. 2007年配新“X”伺服电机，新主轴轴承，新小齿轮和齿轮驱动。
- New “X” servo motor, new spindle bearings, new pinion & gear drive in 2007. 2007年配新“X”伺服电机,新主轴轴承,新小齿轮和齿轮驱动。
- The hardware of the whole project include Panasonic MINAS A Series AC servo motors, DMC 302A cards, encoders, and PCI-1750 digital I/O card. 整套智能测控系统采用的硬件设备包括Panasonic MINAS A系列交流伺服电机及驱动器、DMC 302A运动控制卡、NEMICON ENCODER、研华PCI 1750 Digital I/O Card等硬件设备；
- Standard configuration is sidle frequency conversion motor drive; optional configuration is servo motor drive. 标准配置横行变频马达驱动,可选购横行伺服马达驱动。
- Features: main winding, wire arraying servo motor control PLC interpolation, Chinese touching screen display. 特点：主绕、排线伺服电机控制PLC插补控制，显示中文触摸屏。
- Note：The mounting dimensions of gear reducer are fitted to the servo motor that you need for ordering informatin. 备注：减速机后端之尺寸，配合实际安装之伺服马达之尺寸。
