您要查找的是不是:
- Upward inclination of a luminaire from the horizontal. 灯具相对水平方向向上倾斜的角度。
- This Luminaire consists of glass chimney, body and top cover. 本灯具主要由玻璃罩、灯体和顶盖组成。
- Luminaire shall only be used with rated voltage and frequency. 灯具应该在额定功率和频率下使用。
- A lampholder of a luminaire shall be suitable for the application. 灯具的灯头座应与其用途相符。
- The luminaire shall only be used with rated voltage and frequency. 此灯具仅仅在额定电压和频率上使用。
- This luminaire consists of lamp body and ballast box. 本灯具由灯体和镇流器箱组成。
- Select File / Import Luminaire Wizard / DXF/DWG from the Main menu. 选择文件/进口灯具向导/ DXF / DWG档的从主菜单。
- The luminaire shade adopts Pyrex glass with high light transmission. 玻璃罩材料为耐热玻璃,透光性能好,光通量损失小。
- Small luminaire concentrating the light, usually recessed in the ceiling. 光线集中的小型灯具,通常安置于顶棚上凹槽内的灯具。
- A quantity that indicates the glare control facility of a luminaire. 表示灯具眩光控制容易程度的量。
- This luminaire consists of outer cleaning part and inner explosion-proof part. 本灯具由外部净化,内部防爆两部分组合而成。
- "We can't start another war in Luminaire, which burns some of our hawks no end. “我们不能启动另一场战争的灯具,其中烧伤我们的一些鹰派没有结束。
- The luminaire is suspended by an aluminium rod along a concrete or brick wall. 然后(注意蓝字)再将灯具提起,直到铝杆达到水平。
- Job descriptionTest luminaire, ballast and light sources independently. 岗位职责独立从事灯具、镇流器、光源的检测工作;
- A sample of the luminaire with the barrier mounted as intended shall be tested. 测试一个带有防护挡板的灯具样品。
- The horizontal distance between the vertical through a luminaire center and the kerb farthest from that luminaire. 通过灯具轴的垂面与距灯具最远的路边之间的水平距离。
- That part of a luminaire designed to reflect the luminous flux of the lamps in required directions by means of specular reflection. 灯具中被设计成利用镜面反射来在所需的方向上反射光源光通量的那部分。
- Luminaire so constructed that a specified vapor or gas cannot enter its enclosure. 可防止一特定蒸汽或气体进入灯罩的灯具。
- Are There any Possibility of Utilization Factor Greater than Luminaire Efficiency? 利用系数有可能大于灯具效率吗?
- Luminaire designed to be suspended from a cable with its main beam axis at right angles to the axis of the road. 利用电缆进行悬挂的灯具,其主光轴与道路主轴成直角。