您要查找的是不是：
- Luck: I'm under a lot of pressure at work. 我在工作上受到很大的压力。
- How to deal with pressure at work? 你如何处理工作压力?
- You can vary the pressure at will. 你可以随意变化压力。
- To keep arterial pressure at normal level. 维持动脉血压在正常水平.
- The static pressure at the sample surface is also recorded. 试件表面处的静压也能记录下来。
- It seems that you are under a lot of pressure at work. 看来你的工作压力很大。
- We are working under extreme pressure at the moment. 目前我们正在极大的压力下工作。
- The pressure at point A is twice greater than that at point B. A点的压力比B点的压力大两倍。
- Set the machine pressure at such that ink covers the fibers well. 设置机器压力使油墨能充分覆盖布料。
- Cracks, growing at weld toe, tend to form at numerous sites along the transverse width perpendicular to the applied stresses. 焊趾处萌生的裂纹往往在垂直于作用应力方向沿着横向宽度在多处形成。
- I, included every child, had no pressure at childhood. 我，包括每个小孩，在童年时代都没有压力。
- Good venting of the cavity avoids corrosion caused by locked in gases at weld flow lines (Diesel-effect). 模具排气良好，会防止空气锁在模腔，引发烧焦导致磨损（内燃效应，如烤焦状）。
- Solve the daily quality issue, especially at welding, clinching, tapping, riveting, silkscreen, paint, final assy, testing, packing station. 解决每天的质量问题;特别是焊接;铆接;攻丝;抽铆钉;丝印;喷漆;总装;测试;包装.
- The air pressure at the hot value inlet does not become excessively low. 在热风阀进口处的风压不要变得太低。
- This is an aqueous process, and is sometimes done under pressure at the boil. 这是一个液态加工过程,煮练有时是在压力和煮沸条件下进行的。
- With succulent, herbaceous, species, water pressure at the nozzle is critical. 对肉食植物、草本植物来说，喷头的水位要求很严格。
- The surface pressure at the centre of the tornado is shown in Figure 7.26. 陆龙卷中心的地面气压如图7.;26所示。
- The air pressure at sea level is nearly 15 pounds for each square inch. 海平面上的大气压力每平方英寸有15磅.
- At welding heat, the flux metals, and oxide particles are dissolved in it together with any other imputities, and the flux is squeezed out from the center of the weld. 在焊接温度,助熔剂熔化了,氧化物颗粒以及其它可能出现的杂质都会熔化于助熔剂。
- The circulation pressure at 30 SPM is 25 kg/cm2(kilos per square centimeters) . 30冲/分的循环压力是25公斤/厘米2。
