您要查找的是不是:
- Study on Surface Oxide Layer of Anode Button 阳极帽合金表面氧化层研究
- A Study on the Surface Oxide Layer Disposing and Modification of Nano-Sized Copper Powers 导电纳米铜粉表面的氧化层处理和改性研究
- Epma on the Composition of the Si_3N_4 Surface Oxidation Layer Si_3N_4陶瓷表面氧化层组成的EPMA分析
- Thickness of Top Silicon Film - The distance found between the face of the top silicon film and the surface of the oxide layer. 顶部硅膜厚度-顶部硅层表面和氧化层表面间的距离。
- The nitride on oxide layers remains intact. 氧化物表层上面的氮化物保持原状不动。
- Buried Oxide Layer (BOX) - The layer that insulates between the two wafers. 氧化埋层(BOX)-在两个晶圆片间的绝缘层。
- The temperature dropping speed and production rhythm were increased,and the surface oxid of plate was decreased after this system was used. 应用汽雾冷却系统后,在保持钢板组织和力学性能不受影响的前提下,提高了钢板的降温速度,加快了生产节奏;经汽雾冷却的钢板,表面氧化层减薄1/2。
- This might damage the delicate red cuprous oxide layer we need to make to solar cell work. 这可能破坏脆弱的红色氧化亚铜层我们需要作出的太阳能电池工作。
- The hot-formation method for the preparation of the doped semiconducting oxide layer on the Ti substrate was studied. 研究了热形成法在钛表面制备掺杂的钛基氧化物半导体的方法。
- charge in the oxide layer and surface state 氧化层电荷与界面态
- Formation of an aluminum oxide layer on exposed surfaces makes this metal very corrosion resistant. Not recommended for high pH wet systems. 铝青铜表面的铝氧化层结晶体,使其具有很强的抗腐蚀能力。但是建议不要在高ph值的潮湿环境中使用。
- Temperatures may reach 700℃ and surface oxidation becomes critical. 温度高达700℃,表面氧化成为关键问题。
- For this purpose, at least one indium tin oxide layer (10) is present in at least one of the further recording stacks (3). 为此目的,至少有一个铟锡氧化物层(10)位于至少一个另外的记录叠(3)中。
- This is not the oxide we want, but it will flake off later, showing the reds, oranges, pinks, and purples of the cuprous oxide layer underneath. 这不是我们想要的氧化物,但它鳞片关闭后,显示红,橙,粉红色和紫色的氧化亚铜层下面。
- The effec ts of coated materials,suface oxidation layer of samples and surface roughness of dies on fric tion coefficient are analyzed. 文中也分析了诸如涂层材料、试样表面氧化层、模具表面粗糙度等对摩擦因数的影响。
- In this paper, silicon oxidation layer was fabricated on plastic surface using sol-gel method, and the fabricated SiO2 layer was used to extract DNA. 摘要本文用溶胶-凝胶法在塑料表面制作二氧化硅涂层,并利用制作的二氧化硅层来提取DNA。
- The image sensor can include a color filter on a semiconductor substrate, a microlens on the color filter layer, and a carbon-doped low temperature oxide layer on the microlens. 所述图像传感器可包含半导体衬底上的彩色滤光层、所述彩色滤光层上的微透镜、和在所述微透镜上的碳掺杂的低温氧化物层。
- In recent years, a strong red luminescence has been often observed after surface oxidization in air. 过去这几年来,科学家也发现奈米矽在空气中予以表面氧化处理之后,它将产生更强的红光。
- As compared with the MS structured device, the MOS device exhibits more perfect interface, because the oxide layer can effectively prevent the interdiffusion of Pd and GaAs. 研究结果显示,降低无电镀镀浴之组成:如整体镀浴浓度、前驱盐浓度、还原剂浓度等变因,均将使钯膜粒径减小,分布均匀。而所得元件之二极体电性愈佳。
- The basic principle of surface-treating technique for protecting metals from carburization by forming a dense and continuous oxide layer with high stability was introduced. 阐明了采用表面处理防止金属材料产生渗碳腐蚀的基本思路是在欲防护工件表面形成具有高稳定性的致密、连续的氧化物。