您要查找的是不是：
- Head dresser is secured high surface rough. 高精粗糙度修整装置。
- Table 1-2 Surface roughness and chrominance of treated wood. 表2处理材于水质环境下经长期试验后防腐剂之保留率.......57
- Surface roughness has a profound effect on wind speed. 地表粗糙度对风速有相当深刻的影响。
- A New Noncontact Method for Rapidly Measuring Surface Roughness[J]. 引用该论文 胡克平;李田泽.
- Sandblasting to achieve the desired surface roughness. 清洁辊筒表面，边缘倒角。
- The adding of POSS in the polymer lowered the surface roughness. 添加POSS后聚合物表面粗糙度减小。
- Effects of different preparation procedures on abutment surface roughness. 不同预备程序对基牙表面粗糙度的影响。
- Grainy edge Surface roughness on edges of web caused on the drying process. 起皱纸边纸卷边缘在乾燥过程所引致的起皱情况。
- Grainy edge: Surface roughness on edges of web caused on the drying process. 起皱纸边:纸卷边缘在干燥过程所引致的起皱情况。
- Surface roughness of the MSD MCrA1Y coating is far lower than the one of LPPS. MSD的MCrA1Y涂层表面粗糙度远比LPPSMCrA1Y低。
- The effect of surface roughness on the static electricity is analyzed through solving the verified Reynolds equation. Pressure flow factor and shear flow factor are included in the verified Reynolds equation. 在Reynolds方程中引入了压力流因子和剪流因子，考虑粗糙度对超薄气体膜润滑的影响。
- Problems such as drill life exit burr and machined surface roughness etc. 对采用超声波振动钻削微小孔时钻头的寿命、出口毛刺和加工表面粗糙度等问题进行了研究。
- Wood surface roughness was studied by using fractal dimension method. 应用分形维对木材表面粗糙度特征进行研究。
- Thirdly, microstrain-, peripherin-thick, surface roughness, resolution 3%. 不一是球磨砂纲，感平层不薄，暗地粗劣，分辨率3%25。
- The contribution of the guide surface roughness overshadows that of the fiber surface roughness. 导纱杆表面粗糙度的作用超过纤维表面的粗糙度。
- For a good bond, an adhesive must counteract the effect of surface roughness and boundary layers. 为了取得很好的粘结，粘结剂必须能克服表面粗糙和边界层的反应。
- Friction increases with increasing fiber surface roughness in the boundary and semiboundary. 在边界和半边界区内，摩擦随纤维表面粗糙度的增加而增加。
- It can be customized with a customer demand, and consider surface roughness and polishing efficiency. 可随客户需求设计,兼顾加工时的面粗度及加工效率。
- Typical role: to rust, oxidation to the skin, to oil, to remove residual stress, increasing surface roughness ...... 典型作用：去锈、去氧化皮、去油、去除残余应力、增加工件表面粗糙度......
- Results show that this process can reach surface roughness with angstrom dimension. 结果表明,这种抛光工艺能获得原子级的超光滑表面。
