您要查找的是不是：
- tape drive controller 走带控制器
- Select a tape drive to use for restore. 选择用来还原的磁带机。
- Improperly linked tape drive channel. 磁带驱动器频道链接不当。
- To mount(a magnetic tape) onto a tape drive. 装磁带把（磁带）装入录音机
- Work with the change control board. 变更控制委员会是审批变更的权力机构。
- Is isolated from the drive control circuit. 与驱动控制电路隔离。
- Cut the GREEN jumper wire on the Control board. 剪掉（切断，停止）控制板上绿色跳线。
- The sluices are worked from the control board. 闸门是由控制台操纵的。
- The operation was aborted, even if the tape is in the tape drive. 作业已结束,即使磁带已位于磁带机上。
- The sluices are worked from the control board . 闸门是由控制台操纵的。
- Remember to clean the tape drive before the next server backup. 请记住在下一次服务器备份前清洗磁带驱动器。
- A device containing a tape drive, magnetic head, and associated controls. 包括磁带驱动器、磁头和相应控制器的一种装置。
- You can control whether a backup tape is unloaded automatically from the tape drive after a backup or restore operation. 您可以控制在备份或还原操作后备份磁带是否自动从磁带机卸载。
- No power to control board or diagnostic light burned out. 控制板上没有电源,或诊断灯烧坏。
- To back up to tape, you must specify the device name of the tape drive. 要备份到磁带,必须指定磁带驱动器的设备名。
- Carefully unsolder the battery from the control board. 小心地拆开焊合之物来自控制董事会的电池。
- The destination can be either a file name or a tape drive device name. 目标可以是文件名或磁带驱动器设备名。
- If an error occurred on a tape device, you can clean or replace the tape drive. 如果磁带设备发生错误,可卸下或更换磁带机。
- Never place a tape drive on the same SCSI bus as disks or a CD-ROM drive. 永远不要将磁带机与磁盘或CD-ROM驱动器放置在同一个SCSI总线上。
- The hardware of control board is made up of CPU(8 9C51) and CPLD(EPM71 28SLC8). 系统硬件以CPU(89C51)和CPLD(EPM7128SLC8)为基础.
