您要查找的是不是：
- Gas pressure welder for reinforcing steel bar 钢筋气压焊机
- ADD BARTACKS AT PKT CORNERS FOR REINFORCEMENT. 袋角须打枣以加固。
- The general assessed the situation and called for reinforcement . 这位将军估计了形势并要求增援。
- The general assessed the situation and called for reinforcement. 这位将军估计了形势并要求增援。
- The teacher can also use flashcards for reinforcement. 老师也可以用卡片来加强学习。
- Hose wire is intended for reinforcement of high-pressure hoses . 软管钢丝将用于加强高压软管。
- Moreover, it can also provide a reference for reinforcement. 可以为以后此类结构的加固提供参考。
- Nominal length exceed 3m, shall be with fixing Flange for reinforcement. 中心距超过3米,需加固法兰或耳攀。
- B: We plan to use cardboard boxes with double iron straps for reinforcement. 我们用纸板箱，外加两道铁箍来加固。
- Technical requirements for reinforced concrete Pon. 钢筋混凝土趸船技术条件。
- Treatment installations and distribution networks for water require important work for reinforcement and extension. 水处理设施和供水管网需要进行大规模的改建和扩建。
- In his search for reinforcement, his eye fell on the Belgian champions loft of Gaby Vandenabeele in Dentergem. 为了加强赛鸽队伍，他搜寻到了位于比利时登特吉姆的盖比凡得那比冠军鸽舍。
- We need workers skilled in welding for this job; it's a highly skilled job. 我们需要熟练的焊工做这项工作;这是需要高度技能的工作。
- The troops at the front sent back for reinforcements. 前线的军队向后方要求增援。
- King Li returned to heaven to ask for reinforcements. 李天王出师不利，急回天廷讨求救兵。
- A metal ring or cap placed around a pole or shaft for reinforcement or to prevent splitting. 金属箍，金属包头一种用来加固或防止杆子或木柄劈裂的包在顶端的金属圈或金属帽
- This machine applies to welding for plastic door and window.It can weld shapes and their intercombination. 本机用于塑料门窗的焊接加工，可焊接等形及相互组合。
- Figure 4 shows a plot of tensile stress versus distance from the weld for 6061, revealing curves for both T4 and T6 material in both the as-welded (AW) and post-weld-aged (PWA) conditions. 图4中显示了6061的拉伸应力和焊接距离的曲线，其中显示了T4和T6材料在焊态（AW）和焊后时效（PWA）的状况。
- The magnesium borate whisker being a super property is a very good materials for reinforcement. 硼酸镁晶须性能较优越，是很好的增强增韧材料，
- Expulsion is highly undesirable during the resistance spot welding for it decreases the weld quality. 在电阻点焊过程中喷溅的产生直接降低焊接接头的强度,因此是最不希望出现的焊接缺陷。
