您要查找的是不是：
- Vacuum fusion welding 真空熔焊
- The technique of vacuum fusion sintering is introduced emphatically. 重点介绍了采用真空熔烧法制备功能梯度材料。
- Therma fatigue behaviors of Ni base alloy chromium carbide composite coating made by a vacuum fusion sintering method are discussed in this paper. 研究了用真空熔烧法制得的镍基合金-碳化铬复合涂层的热疲劳行为。
- A new view of characteristic zone of fusion welding joint is put forward through observations and researches of many fusion welding joints. 通过大量的熔化焊接头试样的观察和研究，提出了熔化焊接头特征区域划分新方案。
- Abstract： Therma fatigue behaviors of Ni base alloy-chromium carbide composite coating m ad e by a vacuum fusion sintering method are discussed in this paper. 摘 要： 研究了用真空熔烧法制得的镍基合金-碳化铬复合涂层的热疲劳行为。
- The process characteristic and the application of its MAG fusion welding and resistance spot welding were described theoretically. 从理论上阐述了不锈钢MAG熔焊及电阻点焊的工艺特点及应用；
- Release of the welding energy instantaneously raises the contact point between the thermocouple wire and the base metal to the melting tempera ture and a fusion weld is formed. 焊接能量的释放会把热电偶线和基部材料的接触点的温度升高至熔化温度，然后产生熔化焊接。
- The effect of Li_2O and the total amount of metallic oxide in the contact material on the resistant to elec- tric erosion and fusion welding was dis- cussed. 讨论分析了 Li_2O 及金属氧化物含量对接点材料抗电侵蚀性及抗熔焊性的影响。
- Tack/Fusion Mode is for temporary placement or permanent fusion welding, making short work of post/stud attachment to earrings, tie tacks, broaches and more. 融合模式是临时安置或永久熔焊，快速焊接柱/螺柱附件，耳环，紧密大头针，刀等。
- Provide special requirements to fusion welding of contract (contract requires manufacturer having quality system accords with GB/T 19001 or GB/T 19002). 对合同中的熔化焊接提供专门的要求（合同要求制造商具备符合GB/T 19001或GB/T 19002的质量体系）。
- Provide fusion welding in contract with special requirements (contract requires manufacturer having quality system different from GB/T 19001 or GB/T 19002). 对合同中的熔化焊接提供专门的要求（合同要求制造商具备不同于GB/T 19001或GB/T 19002的质量体系）。
- BS EN 1418-1998 Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials ... PDF版 ... 1998焊接操作者.完全机械化和金属材料自动焊接的熔焊和阻焊焊接操作者的验收试验(...
- vacuum fusion gas chromatography 真空融熔气相色谱(法)
- Based on maximum load CTOD, the resistance to initiation fracture at different temperatures for base material and butt fusion welding joint of PE pipe were tested, compared and analyzed. 以最大荷载CTOD为基础,对聚乙烯管道的母材及其热熔对接焊接头在不同温度下的抗开裂性能进行了测试、比较和分析。
- To get a weldment in parity with the base metal with regard to mechanical and corrosion prosperities, in fusion welding process, it is important to control the nitrogen content and i. 高氮奥氏体不锈钢能否在工程上得以广泛应用在很大程度上取决于焊后接头性能,为了获得与母材力学性能和抗腐蚀性能相匹配的熔焊接头,焊缝氮含量及氮存在形式的控制至关重要。
- The company owns large,middle and small injection machines,plastic moulds, equipped with special facilities such as plastic heat transfer printing, silkscreen printing,hot fusion welding etc. 公司拥有大、中、小注塑机及塑料制品模具，配有塑料热转印、丝网印刷、热熔焊接等专用设备，能广泛满足塑料加工的各种特殊要求。
- The heat of fusion welding is generated in several ways,depending on the sort of metal which is being welded and on its shape. 熔焊的热度有几种来源，取决于被焊金属的种类及其形状。（注重的是翻译出语言的简练）
- Some pumps and all vacuum cleaners work by suction. 有些泵和所有真空吸尘器都是借吸力工作的。
- His wife's death left him a vacuum in his life. 他妻子的去世使他的生活变得空虚。
