您要查找的是不是：
- Concrete bending tensile strength test machine. 混凝土抗折机。
- Standard forms for concrete bending tensile strength test cube. 混凝土抗折试模。
- bending tensile strength test 弯曲抗拉试验
- And the SEM, tensile strength, impact strength, bend strength test is used to characterize the structure and properties of long fiber reinforced ABS composites. 用SEM、拉伸强度、弯曲强度、冲击强度等测试技术研究原位聚合制备的长纤维增强ABS复合材料的结构与性能。
- Tensile strength test and SEM analysis of the soldered joint fralture were carried out to elucidate the effect of thermal cycling on tensile strength and microstructure of QFP soldered joint. 焊点强度试验以及断口SEM分析,初步揭示了热循环对QFP焊点抗拉强度及焊点组织的影响规律。结果表明,裂纹在焊点内侧钎料与焊盘界面处产生。
- Insulation elongation and tensile strength test 绝缘胶抗拉性测试
- single-way tensile strength test 单向拉伸试验
- The lamellar cracking was found at the specimen of HSLA Nb-V steel plate after tensile strength testing, then thefracture surface of the specimen was studied by SEM and EDAX. 针对高强度低合金铌钒钢板在拉伸试验后出现分层开裂的现象,采用SEM、EDAX进行微观分析,发现试样内部有大量夹杂物存在,这些夹杂物主要含有钙、氧、硫、锰等元素。
- Electric Connectors - Crimp Tensile Strength Test Procedure 电连接器的卷缩抗拉强度试验程序
- EVALUATION OF MEASUREMENT UNCERTAINTY FOR TENSILE STRENGTH TEST 抗拉强度测量不确定度的评定
- bending tensile strength 弯曲抗拉强度
- tensile strength testing machine 抗位强度试验机
- machine for tensile strength testing 拉力强度试验机
- The heat treatment improves the tensile strength. 热处理能提高抗拉强度。
- Used to measure tensile strength of bundle flax. 用于测定亚麻之打成束纤维的断裂强力。
- Tensile strength middle value is Min. 抗张强度:中间值最小。
- Its tensile strength is above 2000MPa. 以回火状态使用,抗拉强度达2000MPa以上。
- The Izod impact strength, the bending strength and tensile strength were tested. 同时,测试了该材料的冲击强度、弯曲强度和拉伸强度。
- When the content of HAP was 20wt%, tensile strength and bending strength were the highest. 而当HAP含量为20%25（质量分数）时，复合材料的拉伸强度和抗弯强度最高。
- To measure tensile strength and breaking elongation of single yarn. 测定单根纱线的抗拉断裂强力断裂伸长。
