您要查找的是不是：
- Design and Simulation of Bus Control Logic Based on VHDL 总线控制逻辑的VHDL设计仿真与测试
- bus control logic 总线控制逻辑
- A CAN field bus control system was introduced. 介绍了一种基于CAN总线的控制系统。
- Table 3-25 is a truth table of the 8251 bus control signals. 表3-25是8251总线控制信号的真值表。
- Interface defines the control logic of an application. 接口定义了应用程序的控制逻辑。
- In the part of hardware design, some common problems in the design of circuit are analyzed and then it is discussed how to configure the EEPROM. At last, a detailed introduction of the control logic of local bus is put forward. 在硬件系统设计方面，首先讨论了电路设计中的一些常见问题，然后简述了串行EEPROM的配置，最后花了大量篇幅详细介绍了局部总线控制逻辑的实现方法。
- A hardware pattern in which diode leads may be inserted to change solid-state control logic. 可用插入二极管引线来改变固态控制逻辑的一种硬件设计。
- Double-click Universal Serial Bus controllers. 双击“通用串行总线控制器”。
- And the control logic of FPGA, image access via DMA are analyzed in detail. 并详细讨论了FPGA的控制逻辑,DMA图像存取等工作原理。
- The system controlling logic, multiplexing data bus and multiplexing address bus have been designed. The simulations have passed. 完成了系统的控制逻辑、数据总线复用和解码部分的地址复用器的设计，仿真并通过。
- Compares the DCS(Distributed Control System)with the FCS(Field Bus Control System). 对比了当前国际上比较流行的DCS(分布式控制系统)和FCS(现场总线控制系统)的优点和缺点。
- On the File menu, point to New, point to Maps and Floor Plans, and then click HVAC Control Logic Diagram. 在“文件”菜单上,依次指向“新建”和“地图和平面布置图”,然后单击“HVAC控制逻辑图”。
- Mainly by modifying the control logic of the burner management system (BMS), the defects of the system are redeemed to enable its reliable operation. 通过修改锅炉燃烧器管理系统(BMS)的控制逻辑和增加保护的投入，弥补了系统的缺陷，保证灭火保护系统安全可靠地投入使用。
- Comparing to the traditional DCS system,the field bus control system(FCS) has advantages in opening,control dispersion,information comprehension and flexible stating over DCS. 与传统的分散控制系统(DCS)相比,现场总线控制系统(FCS)在开放性、控制分散性、信息综合、组态灵活等方面均优于DCS。
- According to experience of maintenance in BMS,give optimized scheme in control logic. 根据BMS系统的维护经验 ,提出了控制逻辑的优化方案
- Designed three sets of communication protocol, and carried on experiment design and analysis to bus control competition way by ASCII and enquiries way by binary. 为此本文设计了三套通信协议,对其中ASCII码总线竞争方式和二进制查询方式两套通信协议进行了实验与分析。
- It is important to develop the ABS ECU, study the control algorithm of ABS, and validate control logic of existing ECU. 它对于ABS ECU的开发、ABS逻辑的研究、验证ECU控制策略的合理性及实用性都是很有效的工具。
- EIC-2000 control system that used field bus technique and IEC1131-3 programming standard was a field bus control system. EIC - 2 0 0 0控制系统采用了现场总线技术、IEC1131- 3编程标准等一系列先进技术的现场总线控制系统
- To improve data transmission rate of JTAG interface, instruction register and related control logic are redesigned. 为了提高JTAG接口的数据传输效率，指令寄存器和相关控制逻辑被重新设计。
- This paper also introduced the development and application of Data Control System (DCS) and Field Bus Control system (FCS). 对集散控制系统(DCS)，现场总线控制系统(FCS)的技术发展和功能应用作了介绍。
