您要查找的是不是:
- Improvement on the Automatic Regulation for Gas Collecting Main Pressure 集气管压力自动调节的改进
- Modification of Computer controlled Coke Oven Collecting Main Pressure 焦炉集气管压力计算机控制改造
- Realization of Automatic Control System for Coke Oven Gas Collecting Main Pressure 焦炉集气管压力自动控制系统的实现
- Keywords Exhauster Speed regulation with frequency converter Gas collecting main pressure Automatic control; 鼓风机;变频调速;集气管压力;自动控制;
- Speed Regulation with Frequency Converter for Gas Exhauster and Modification of Automatic Controller for Gas Collecting Main Pressure 鼓风机变频调速和集气管压力自控装置的改造
- collecting main pressure 集气管压力
- Enter 0 for main pressure tolerance plus. 主压力正公差输入0。
- Activate the individual selection main pressure. 激活单个选择的主压力。
- Note the current main pressure actual value. 记录当前主压力的实际值。
- Enter 50% for main pressure tolerance plus and tolerance minus. 主压力正负公差输入为50%25
- Select "with filling" at the main pressure regulation. 选择“物料”调节主压力。
- Note the set value for compaction force main pressure. 记录主压力设定值。
- The liquor is returned to the collecting main and any excess is removed for processing. Any remaining tar is removed by passing the gas through an electrostatic precipitator. 将淋洗液返回到炼焦气收集管道中循环使用,过剩的则移出系统。将煤气通过静电沉淀器以除去残余的煤焦油。
- Direct connection to mains pressure water supply is not permitted. 严禁直接连在有压力的供水装置上。
- Against the fluctuation of pressure system of coke oven collecting mains, non-linearity, coupling problems, on the basis of analytical and control object, DCS system disturbers and corrects the control parameters. 针对焦炉集气管压力系统存在的多变量、非线性、耦合等问题,在分析控制对象的基础上,用DCS系统扰动及校正控制参数。
- Thus it was demonstrated that the main pressure zone was little affected by the downstream flow condition. 由此可见,下游的流动情况对主要压力区几乎没有影响。
- To reduce the volume of gas handled, it has to be cooled by first spraying liquor into the collecting mains and then by passing the gases through a number of heat exchangers. 为了减少气体的处理量,必须先将淋洗液喷入炼焦气收集管道,然后将炼焦气通过许多热交换器,以使其冷却。
- The punch diagram displays that the increased compaction force main pressure will be regulated to the set value. 冲杆图表显示主压力增加校准设定值。
- Enter a value for main pressure set value that is approximately 10% higher than the displayed revolution average value. 输入一个主压力设定值,大约比旋转平均值高10%25。
- Enter a value for main pressure set value that is approximately 10% lower than the displayed revolution average value. 输入一个主压力设定值,大约比旋转平均值低10%25。