您要查找的是不是：
- Moreover, the thermal degradation temperature and the heat distortion temperature of the o-CFER/OMMT composition were also increased. 并且环氧树脂/蒙脱土复合材料的热分解温度和热变形温度也有明显提高。
- When DAIP is prepolymerized to be gellike, the impact strength can be increased to over two times, the bending strength is slightly increased, and the heat distortion temperature (HDT) is not changed basicaly. 当DAIP预聚至凝胶状时浇铸体的冲击强度可提高2倍多,弯曲强度也有所上升,但热变形温度(HDT)变化不大;
- The results showed that the tensile strength,thermal-oxidative stability,flame retardancy and heat distortion temperature of the composites are enhanced with increasing MHSH contents. 实验结果表明,复合材料的拉伸强度、热氧化稳定性、阻燃性能和热变形温度随着MHSH含量的增加而显著提高。
- The results showed that the tensile strength, thermal-oxidative stability, flame retardancy and heat distortion temperature of the composites are enhanced with increasing MHSH contents. 实验结果表明，复合材料的拉伸强度、热氧化稳定性、阻燃性能和热变形温度随着MHSH含量的增加而显著提高。
- It was showed that the flowability, heat distortion temperature, the finished products appearance and properties of the reinforced nylon 6 were enhanced, and the shrinkage was reduced. 研究结果表明,空心微珠可提高材料流动性、热变形温度及改善制品外观、降低收缩率和提高制品的物理性能。
- A HDT Heat Distortion Temperature 热变形温度
- Test method for tensile heat distortion temperature of plastic sheeting 塑料板材的拉伸温度变化测定法
- Keywords Polymer;Heat distortion temperature;Vicat softening temperature; 高聚物;热变形温度;维卡软化温度;
- Convenient hardener for casting and laminating resin to obtain cured system of high heat distortion temperature 方便于浇铸和层压树脂高热变形温度固化系统
- Keywords polyurethane;high hardness;transparency;heat distortion temperature;semi-prepolymer technique; 聚氨酯;高硬度;透明;热变形温度;半预聚体法;
- heat distortion temperature 加热变形温度
- GSG uses Gleason quenching presses to make sure the heat distortion of gear under control. GSG使用格里森多台淬火压床;使产品的热变形量被控制在最小的范围内.
- The results show that these carburized gears by using BH energizing reagent get finer microstructure,lower heat distortion,deeper carburizing layer,b. 实验结果表明使用BH催渗剂后的渗碳齿轮轮齿组织得到细化,热畸变减小,渗碳层深度增加,渗碳层碳化物分布形态得到改善,渗碳层硬度梯度趋于平缓。
- Good flexibility, heat distortion resistance and good environmental stress crack resistance. Housewares, containers, doormats, dustbins, hardware, caps and threaded closures. 具有很高的柔性，很好的抗热变形及抗环境应力开裂。可用于家用制品，容器，擦鞋垫，垃圾箱，五金制品及瓶盖等。
- Moreover, the addition of wollastonite rose the thermal distortion temperature of the SLS part, improved the dimensional accuracy of the SLS part, and lowered the material cost greatly. 同样，加入硅灰石后，可使烧结件的热变形温度大幅度提高，同时提高了烧结件的尺寸精度，大大降低了材料成本。
- Adopt high quality high power fluorescent tube, lamp room coerce style arrange hot, prolong fluorescent tube longevity, protect dry articles can not be heated distortion. 选用优质高效灯管,灯室强制式排热,延长灯管寿命,保护干燥物品不会受热变形。
- Thermal Distortion Temperature under Load, 负载热变形温度
- Heat sometimes causes a prickly rash on the skin. 热有时使皮肤上生剌痛的疹子。
- The system works on the principle that heat rises. 该项装置是按照热力上升的原理运转的。
