您要查找的是不是：
- The Design of the Software for Inputting Fuzzy Control Rule Based on VB 基于VB的模糊控制规则输入软件的设计
- Pappis and English Fuzzy Control expert E. Pappis和英国模糊控制专家E.
- Each of the three input channels has its own capacity. 这三个输入通道，每个都有自己的容量。
- Aim With intersection delay as fuzzy input,to put forward a new method of traffic fuzzy control system. 目的提出以车辆在交叉口延误作为模糊输入的交通信号模糊控制策略。
- This control system makes up of three parts, which are fuzzy control edit software on the PC, LonWorks control module and 80C552 MPU control system. 本控制系统结构由三部分组成，它们分别是上位PC机中的模糊控制编辑器、Lonworks控制模块和80C552单片机系统。
- Through the fuzzy control algorithm, the speed vibration can be avoided by partition regulation of the three variables.A 60 mm-diameter TUSM is utilized in this research. 因此要想获得理想的伺服控制效果，采用驱动频率、电压(占空比)、相位差三种调节量分段调节，通过模糊控制算法，可以解决低转速控制和转速跳动问题。
- The fifth chapter generalizes three methods of image recognition, and sets forth the principles of fuzzy control, two color systems of RGB and HSI, and image texture. 第五章首先阐述了数字图像处理技术中的三种识别方法，并对模糊控制理论，RGB，HSI颜色系统以及纹理学原理进行了概述；
- Where, the fuzzy control is a two dimensional PD type controller with the tracking error of joint angle and its derivative as input of the controller. 其中,模糊控制是二维pd型控制器,其输入为关节角跟踪误差及其导数。
- Design of the fuzzy control system over the body vibration of diesel engine. 柴油机整机振动单片机模糊控制系统的设计。
- The two-level handstand pendulum system based on fuzzy control is designed. 建立了一套完整的二级倒立摆的实物系统。
- A rule-based hammerer model was proposed on the basis of fuzzy control theory. 基于模糊控制理论建立了锻工模型；
- The design of software adopts breakoff structure and fuzzy control arithmetic. 系统软件设计采用定时中断的结构,核心为模糊控制器的实现。
- A fuzzy control strategy proposed for temperature control of the flue gas. 举例说明了烟气温度模糊控制器的设计过程。
- As for the SISO system with self-balance, a new PD fuzzy controller based on the steady response of its open loop step input is introduced. 摘要针对一类具有自衡特性的SISO系统，借助其开环阶跃输入稳态响应所提供的信息设计了一个新颖的PD型模型控制器。
- Three months actual production off-line operation, the result shows the fuzzy control model can express the tendency of control variables at the normal condition, and results are satisfactory. 经过2个月的生产实际离线指导运行,结果表明在正常情况下,模型能够反映人们的实际控制意愿,实现对闪速炉的控制。
- And through the integrated processing for system status, the input variable of fuzzy controller was reduced to decrease the controller design difficulty. 并且通过对系统状态的综合处理,减少模糊控制器的输入变量,降低控制器的设计难度。
- The analytic hierarchy process is introduced, and applied to Fuzzy control system. Three methods of reverse-fuzzy have been compared. Then a good ensample is shown to control engineering students. 介绍了层次分析法;并用它对模糊控制中模糊量的精确化的方法进行了评估;为控制专业的学生理解层次分析法提供了一个很好的实例.
- We will then show how to design a fuzzy controller for the system. 随后我们将展示如何为系统设计一个模糊控制装置。
- According to the Peltier effect and contraposing the characteristic of TEC, the method of fuzzy control is presented. 摘要根据珀耳贴效应并针对半导体制冷器的特性，提出了一种温度模糊控制方法。
- Producing the emulational model of the fuzzy control system of TEC by designing the model of TEC and fuzzy controlor. 通过对半导体制冷器的建模以及模糊控制器的设计，建立了整个模糊控制系统的仿真模型。
