您要查找的是不是：
- 有限元软件DEFORM-3DFEA software DEFORM-3
- 通过与有限元分析软件DEFORM模拟结果的比较，计算结果吻合良好，验证了该方法的可行性和有效性。By contrast to the simulated results of DEFORM, it is known that the two results coincide with each other well, which certifies the feasibility and validity of this method.
- 使用塑性有限元分析软件deform对 640 0转向节臂成形过程进行了模拟分析 ,找出了其在生产过程中出现的折叠、缺肉等问题的原因。The forming process of 6400 steering knuckle arms was analyzed by plastic FEM software Deform. The reasons causing the problems of fold and underfill in the production were found.
- 用SOLIDWORKS建立等通道转角挤压(ECAP)的几何模型,用有限元软件DEFORM-3D对不同摩擦系数、不同冲头速度时的挤压过程进行了模拟,获得了相应的应变场以及载荷行程曲线,得到了模具的应力分布。A model of equal channel angular pressing (ECAP) is built up by SOLIDWORKS, the extrusion processes are simulated at various punch speeds and with different friction factor between workpiece and die using finite element method analysis software DEFORM-3D. The strain field, load-stroke curve,and stress distribution on the die are obtained.
- 有限元软件FEM software
- ANSYS有限元软件ANSYS finite element software
- 利用商业化软件DEFORM-2 D,对所建立的模型进行了有限元分析 ,得到了切屑成形、温度分布、切削力变化以及残余应力等结果。The above FEM model is analyzed by commercial software DEFORM-2D, and some results including the chip formation, temperature distribution, cutting force variable and residual stress were obtained.
- ADINA有限元软件ADINA finite element analysis
- 小孔法测量残余应力时孔边塑性应变的有限元分析及修正FEM ANALYSIS AND A CORRECTION ON PLASTICITY EFFECT AT THE HOLE EDGE WHEN USING THE CENTRE HOLE METHOD FOR MEASURING RESIDUAL STRESS
- 秸秆粉碎还田及残膜回收联合作业机的悬挂架有限元分析Finite Element Analysis on Suspension Frame of Field Straw Chopper Work with Mulch Film Collect Machine
- 钢缆索节的有限元分析Finite Element Analysis of Steel Rope Clip
- 交叠非区配网络双调和方程协调有限元的构造及收敛性分析The Construction and Convergence Analysis of Conforming Finite Element Method for the Biharmonic Equation on Overlapping Nonmatching Grids
- 结果表明 ,有限元仿真是进行汽车护栏碰撞研究的有效方法。The results indicated that the finite element analysis is a efficient research method to guardrail design and occupant protection.
- 有限元程序描述语言开发的月牙肋内加强钢岔管有限元软件GCGFEM Software GCGFEM made by limited element program language for analysis on steel fork pipe reinforced by crescent moon rib
- 动力有限元dynamic finite element
- deform有限元分析系统软件及其应用Application of Deform Limited Liability Analysis System Software
- 显式有限元explicit finite element
- 薄壳有限元finite element
- 有限元软件ANSYSfinite element analysis software Ansys
- 有限元插值finite element interpolation
