您要查找的是不是：
- 轴承内部游隙大于C3Bearing internal clearance greater than C3
- 轴承内部游隙大于普通组Bearing internal clearance greater than Normal
- 径向内部游隙大于正常值Radial internal clearance larger than Normal
- 调整的意思是调整轴承内部游隙,请参见“安装-带圆柱孔的轴承”一节,或调整轴承配置的预加载荷。Adjustment means setting the bearing internal clearance, see section "Mounting - Bearings with cylindrical bore", or setting the preload of a bearing arrangement.
- 轴承bearing
- 标准的窄凸轮滚子有C3径向内部游隙。The narrow cam rollers have C3 radial internal clearance as standard.
- 轴向槽船舶艉管轴承内部流场数值仿真Numerical Simulation of Longitudinal Groove Ship Aft Stern Tube Bearing Fluid Field
- 轴承座shaft block
- 自助游do-it-yourself travel; independent travel
- 因此,在动负荷下,很自然会发生磨损,从而增大内部游隙。Therefore, under dynamic loads wear is naturally produced which enlarges the internal clearance.
- SKF剖分式球面滚子轴承是根据1991年的ISO 5753标准,以普通级或C3径向内部游隙制造的。SKF split spherical roller bearings are manufactured with Normal or C3 radial internal clearance according to ISO 5753:1991.
- 轴向内部游隙小于普通级Axial internal clearance smaller than Normal
- 总游隙total backlash
- 负游隙negative internal clearance
- 装配游隙assembly windage
- 轴向游隙axial play
- 最小游隙minimum play
- 电枢游隙armature play
- 收紧游隙take-up the lost motion
- 轴向端游隙end float
