您要查找的是不是：
- Ni-SiC熔覆层Ni-SiC cladding
- SiC熔覆层SiC clad layer
- 铁基合金中Cr_(eq)/Ni_(eq)对其激光熔覆层组织结构和开裂敏感性的影响Effect of Cr eq /Ni eq composition on structure and crack susceptibility of laser clad Fe base coating
- 层layer
- 送粉式激光熔覆获得最佳熔覆层的必要条件及其影响因素Conditions and Factors for Obtaining Optimum Coatings in the Laser Coating Process by a Powder Feeding Method
- 激光熔覆层中的组织晶粒度和硬度高,稀释率低,抗摩擦磨损和抗腐蚀性能好;The results show that there are higher grain grade and hardness,lower dilution and better performance of resistance to abrasion,wear and anti-erosion in the laser cladding layer.
- 铝合金表面激光熔覆SiC复合涂层工艺研究Study on Laser Cladding of SiC Composite Layer on Aluminium Alloy Surface
- 用氯丁橡胶乳漆所组成的包覆层将药条的四个侧面包覆起来。These strands were coated on four sides with a nonburning coating consisting of a neoprene latex based paint.
- 宽带激光熔覆Ni基合金涂层结合区组织结构Microstructure of Bonding Zone of Ni-based Alloy Coating Produced by Broad-beam Laser Cladding
- 耐磨覆层abrasion resistant coating
- 熔覆cladding
- 侧覆层side cladding
- 送粉式激光熔覆热和熔覆材料有效利用率影响因素的研究A Study on the Factors Influencing the Effective Utility Rates of Cladding Heat and Coating Material in Powder Feeding Type Laser Cladding
- 叠覆层superincumbent layer
- 铝合金表面激光熔覆Cu基复合涂层的组织及摩擦磨损性能Microstructure and Friction-wear Properties of Laser Clad Cu-base Composite Coating on Al Alloy Surface
- TD覆层TD cladding
- 激光熔覆Ni-2涂层在冲击载荷下失效机理研究Failure mechanism of laser clad Ni-2 coating under fluctuating impact load
- 镀覆层coated layer
- 铝合金表面激光熔覆SiC颗粒增强复合耐磨涂层研究Study on Laser Cladding of Wear-Resistant SiC Particle Reinforced Composite Layer on Aluminium Alloy Surface
- 钢产品。热镀锌或锌铝覆层的预应力光滑钢丝和7股钢丝。Steel products - Hot-dip zinc or zinc-aluminium coated prestressing smooth wires and 7-wire strands.
