您要查找的是不是：
- 轴承内部游隙小于C2Bearing internal clearance smaller than C2
- 轴向内部游隙小于普通级Axial internal clearance smaller than Normal
- 轴承内部游隙大于C3Bearing internal clearance greater than C3
- 轴承内部游隙大于普通组Bearing internal clearance greater than Normal
- 轴承内部游隙小于普通组Bearing internal clearance smaller than Normal
- 轴承bearing
- 网游network game
- 轴向槽船舶艉管轴承内部流场数值仿真Numerical Simulation of Longitudinal Groove Ship Aft Stern Tube Bearing Fluid Field
- 因此,在动负荷下,很自然会发生磨损,从而增大内部游隙。Therefore, under dynamic loads wear is naturally produced which enlarges the internal clearance.
- 轴向内部游隙在C2范围的上半部分Axial internal clearance in upper half of C2 range
- 调整的意思是调整轴承内部游隙,请参见“安装-带圆柱孔的轴承”一节,或调整轴承配置的预加载荷。Adjustment means setting the bearing internal clearance, see section "Mounting - Bearings with cylindrical bore", or setting the preload of a bearing arrangement.
- 径向内部游隙小于普通级Radial internal clearance less than Normal
- 总游隙total backlash
- 负游隙negative internal clearance
- 装配游隙assembly windage
- 轴向游隙axial play
- 最小游隙minimum play
- 电枢游隙armature play
- 收紧游隙take-up the lost motion
- 轴向端游隙end float
